LMA - 1999 Research Report Index

Laboratory for Manufacturing Automation

Go To Precision

Go To Contact Us

Navigation: Home > Research > 1999 Reports

Research in the LMA

Looking for something?

1999 LMA Research Report Index

Download all 1999 Research Reports
PDF (7 MB)

Professor David Dornfeld	Burr Prevention and Minimization for the Aerospace Industry University of California, Berkeley
C. H. Chu	A Framework for Burr Minimization in a CAD/CAM Integrated Environmen Sponsored by:CODEF
	Geometric Approaches for Enhancing Edge Quality in Planar Milling (I): by Adjusting the Radial Depth of Cut Sponsored by:CODEF
	Geometric Approaches for Enhancing Edge Quality in Planar Milling (II): by Adjusting Tool Positions Sponsored by:CODEF
	Geometric Approaches for Enhancing Edge Quality in Planar Milling (III): Tool Exit Detection and Correction in a 2D Free-Form Contour Sponsored by:CODEF
C. H. Chu & C. Brennum	Prediction and Simulation of Milling Burr Formation for Edge-Precision Process Planning Sponsored by:CODEF
C. H. Chu	An Experimental Study on Edge Defects in End Milling of Al-6061 Sponsored by:CODEF
J. Kim	Investigation on the Geometric Characteristics of Drilling Burr in Stainless Steel Sponsored by:CODEF
	Development of a drilling burr control chart for stainless steel Sponsored by:CODEF
	Probabilistic Approach of Burr Type Prediction with the Drilling Burr Control Chart Sponsored by:CODEF
S. Min	Control Chart of Drilling Exit Burr in Low Carbon Steel (AISI4118) Sponsored by:CODEF
	Construction of Drilling Burr Expert System Sponsored by:CODEF
	Mesh Separation Criteria in Finite Element Simulation for Drilling Burr Formation Sponsored by:CODEF
	Investigation of the Interlayer Burrs by Drilling of Multi-Layered Materials Sponsored by:CODEF
B. Shyu	Burr Reduction by Tool Design Sponsored by:CODEF
S. Kumar	Unified Approach to Burr Prediction System Sponsored by:CODEF
A. Rangarajan	Avoiding Tool Exit in Planar Milling by Adjusting Width of Cut Sponsored by:CODEF
P. Brambilla	Burr Formation in Drilling of Aluminum Alloy Sponsored by:CODEF
D. Bellon	Study on burr formation in carbon steel boring Sponsored by:CODEF

Professor David Dornfeld	Process Monitoring and Control for Precision Manufacturing University of California, Berkeley
Y. Lee & A. Chang	Ultraprecision Cutting and Acoustic Emission Monitoring of OFHC Copper Sponsored by: LMA Affiliates
	Probabilistic Analysis of Ductile/Brittle Transition in Diamond Turning of Brittle Materials Sponsored by: NSF/UC SMART
Y. Lee, V. Piaggio, & Y. H. Lim	Effect of Material Directionality in Precision Diamond Turning of OFHC Copper Sponsored by: NSF/UC SMART
J. Luo	Investigation of Material Removal Mechanism in Chemical Mechanical Polishing (CMP): Theory and Modeling Sponsored by: NSF and UC SMART
	Process Modeling of Chemical Mechanical Polishing (CMP) Sponsored by: NSF and UC SMART
K. Bevans	Characterization of CMP Polishing Pads Using Pyrene Fluorsence Sponsored by: CSM
A. Chang	Endpoint Detection for CMP using Acoustic Emission Sponsored by: UC-SMART #97-01
E. Wu	Adaptive Controller for Precision Machining Process Sponsored by: Industry Affiliates of the LMA

CODEF
Precision
Research
- 1998 Research Index
- 1999 Research Index
  - Download 99 Reports
- 2000 Research Index
  - Download 2000 Reports
People
Tools

Looking for something?

CODEF
Precision
Research
- 1998 Research Index
- 1999 Research Index
  - Download 99 Reports
People
Tools

Go To Precision

Go To Contact Us